Problem installing custom FW

[Rrraxxx]

hi i am newbee too and following the intructions an error occurred

whe i try to copied the fvdl-sl-10-1.......img it starts but affter few seconds it says that there no space to copy teh image

it happens in the third partitions 1 2 and 7

thats because the img is about 150-200mb and the partitios had only 32-34 each one???

help, i dont know waht happens

i am using a 60gb disk

i made the partictions an the table correct

[fvdw]

This can only happen if the partition are too small. In fdisk you should be sure it is displaying sectors and not cylinders. Some versions of fdisk seem to come up with cylinders while our guide refers to sectors (you can change this mode in fdiks by using -u option that toggles between sectors and cylinders

[Rrraxxx]

well... my problem continues
in your guide it says cilyndres not sectors bacause it says first cilinder in the creation new partition table but now you say i must use sectors?? i i use sectors the first one its 32 and no 1 so all the guide its wrong??

hardware problem because the disk its only 60gb or what fucking happends??? its 2,5" one thats the problem? diferent kind of sectors, ciynders?

Disco /dev/sdb: 60.0 GB, 60011642880 bytes
64 cabezas, 32 sectores/pista, 57231 cilindros
Unidades = cilindros de 2048 * 512 = 1048576 bytes
Identificador de disco: 0xafdcd32c

Disposit. Inicio Comienzo Fin Bloques Id Sistema
/dev/sdb1 1 32 32752 83 Linux
/dev/sdb2 33 64 32768 83 Linux
/dev/sdb3 65 96 32768 82 Linux swap / Solaris
/dev/sdb4 97 57231 58506240 5 Extendida
/dev/sdb5 97 144 49136 83 Linux
/dev/sdb6 145 145 1008 83 Linux
/dev/sdb7 146 178 33776 83 Linux
/dev/sdb8 179 57231 58422256 83 Linux

Orden (m para obtener ayuda): u
Se cambian las unidades de visualización/entrada a sectores

Orden (m para obtener ayuda): w
¡Se ha modificado la tabla de particiones!

Llamando a ioctl() para volver a leer la tabla de particiones.
Se están sincronizando los discos.
root@pc:~# dd if=/media/NUEVO\ VOL/fvdw-sl-10-1-isp1-19nov2011.img of=/dev/sdb1
dd: escribiendo en «/dev/sdb1»: No hay espacio libre en el dispositivo NO SPACE
65505+0 registros de entrada
65504+0 registros de salida
33538048 bytes (34 MB) copiados, 79,6021 s, 421 kB/s




PLEASE HELP
Sorry for my english , i´m spanish :punk

[fvdw]

Indeed the guide refers to cylinders

However the size of your cylinders is about 8 times smaller then on a "normal" disk.
Yours are only 1048576 bytes while in the guide we assume cylinders of 8225280 bytes
Don't know who formatted it but it is a non standard settings.
Most hard disk have settings like 255 heads, 63 sectors/track, yours has 64 heads and 32 sectors/track

If you want to keep those settings you need to multiple the cylinders needed for each partition with a factor 8
so for sda1 start at cylinder 1 and end cylinder will be 256,
sda2 start 257 end 512,
sda3 513 768,
sda 4 769 57231,
sda5 769 1152,
sda6 1153 1160,
sda7 1161 1416,
sda8 1417 57321

As in your case a cylinder is 1048576 bytes this will give a sda1, sda2 and sda7 partitions of about 256 MB, sda3 384 MB, sda6 8 MB and sda8 58 GB

[Rrraxxx]

ok, lot of thanks

its possible thats the difference it´s because its 2,5" ?

however i´ll follow your instructions as soon as possible and i´ll keep you informed

another question ihave the original internet space space with his fw, but in this case there are two folders and one for my with 725 gb and other, i don,t know where with 275 gb for public users

i want to formated this disk but i don´t know how can I delete the public partition and keep 1g all for me, but in the web server i can´t formate the disc or resize the limit, any ideas??
i have the manual, but nothing about formated or resized, it´s possible if i reset the unit and reconfigured all?
i am looking for the original cd ....

:hail

[fvdw]

That the settings for head and cylinders are different I don't know. The setting you have is more for smaller disks.

About the original hard disk of you isp1 . Our guide describes how to make a backup and make a new partition table and format it. The Lacie partition structure cannot be used with our firmware. If you want to keep the content of the big data partition where all you data was you have to make a backup and put ti back later when fvdw-sl is running in a shared folder.
I do not use original Lacie firmware for isp1 so I don't know whats possible and what not in the original firmware of Lacie

[Rrraxxx]

finally i do it
all its ok

finally i connect with it in samba joining the group WORKGROUP

but and i trying to access ftp too but i can,t i activated the server but it,s impossible what´s happens?

the torrent and the twonky madia are functionally torrent as client but twonky media is a media player or only a media server?

i am using

192.168.1.13 port 21

user-passw admin admin

please help :thinking :pound

[fvdw]

Samba will be activated by itself. how did you try to access ?

ps every menu has a help menu, just click help button in vertical menu or top right button

[Rrraxxx]

i access via samba only when i changed the name to WORKGROUP in configuration
but its impossible to access with ftp i try with implicit ssl , auth ssl but nothing

[Rrraxxx]

i use ftp to transfer my files to the nas easilly

i am reading the ftp help file but p.e in the ftp menu there are 4 points that u can activate, where u write your ip but for what? :pound


and its impossible to swicth off the unit? it continues led lighthing

please this is the last helpppp