plugout.net

Hello Jocko, thank you for your input!
Partition reset thanks to fdisk and -u=cylinders command.
fvdw-sl 11 re-installed and upgraded to 15.3.
I face a problem when trying to upgrade to 16.1 now.
"/fvdw-sl-16.1-upgrade-04jul2021.zip" selected in firmware update menu, Control code : unzip then I get "Error: zip file inconsistent with your current firmware version"
Still get telenet refused when trying to use fvdw-sl console 6.0 18.1 (FW off and only one network card activated, ping is ok when drive is running).
I've been visiting the whole forum and I think I'm using the right process/files, I probably missed something again :dontknow

Bonsoir.

Hi

So first step completed...
With version 15.3, isp v2 should be supported and your nas should be detected as an Internet Space V2. To confirm this point,run

Code: Select all

cat /etc/platform

and "isp2" should be returned

mistert wrote: face a problem when trying to upgrade to 16.1 now.
"/fvdw-sl-16.1-upgrade-04jul2021.zip" selected in firmware update menu, Control code : unzip then I get "Error: zip file inconsistent with your current firmware version"

Maybe a misunderstanding. You can not install directly a patch for version 16.1 on a version 15.3, you have to upgrade first to version 16.1 and then to install the patch

So you have to perform the step 3 ([url="https://plugout.net/viewtopic.php?f=7&t=3059"]as writing in this post[/url]) but there is an issue with the attached packages because no one is built by including the support for isp2 and you can no longer claim fakely on version 15.3 you have a nwsp2 to allow to install the package for nwsp2.

I go to rebuild the package for nwsp2 to include isp2 support.

It is done new package is available for version 16.1 (nwsp2/nwsp max/isp2)

I confirm, "isp2" returned.
Sorry for my misunderstanding, I probably got lost in the massive amount of guidances... :shocked
Waow thanks a lot for adapting so quick the package for isp2 ! I will try asap.

How should I proceed to install "xfvdw-sl-16-1-nwsp2-14feb2024.bin" ? Console only ?

mistert wrote:How should I proceed to install "xfvdw-sl-16-1-nwsp2-14feb2024.bin" ? Console only ?

no use only firmware upgrade menu (step 1 : manual install by uploading the bin file)

Sorry but I can't find this menu, neither in console nor in web interface nor on the forum.
Do you mean I have to connect the hard drive to a linux OS and upgrade like for 11.0 ?

Hi

Sorry, but a tiny file of the firmware interface was not updated to include isp2 support ! :shocked

Attached a patch to fix that. Same way the others patch : move it in your share fvdw and use the upload patch menu to install it with the control code 'unzip'

You have to close your browser and after loading again the firmware interface if the menu "Firmware" is still missing, do a full refresh to reload the interface. Then it should be here now...

"Ok: Install patch successful" ^^

16.1 installed successfully consequently !

Nice !
So see if the other steps run rightly. I think from version 16 isp2 is rightly supported

Failed to upgrade from 16.1 patched (isp2) to 18.2 from web interface:
"=> Firmware upgrade step 1 started:
Search firmware version information for isp2 ...
The latest version available from http://plugout.net is: fvdw-sl 18.2

Check free space on system partition ... OK
Get the bound upgrade files list
Retrieve the firmware package
Try to download part 1 on 5...
Attempt 1: OK, got successful the firmware package part1 file
Try to download part 2 on 5...
Attempt 1: OK, got successful the firmware package part2 file
Try to download part 3 on 5...
Attempt 1: OK, got successful the firmware package part3 file
Try to download part 4 on 5...
Attempt 1: OK, got successful the firmware package part4 file
Try to download part 5 on 5...
Attempt 1: OK, got successful the firmware package part5 file
Extract firmware package...
Extract error : some files are missing
Error 303"

:sob