plugout.net

by **matt_max** » Tue Oct 19, 2021 6:02 pm

Thank you @Jocko - problem with update is solved now.

Now lets get back to original problem. AFAIS when I click on System Management -> Shutdown/Restart -> NAS Shutdown my Lacie cannot "wake up". When I disconnect power cord and connect it back nothing happens. Network led lights start blinking same as blue case light but disc do not start and therefore I cannot log in or even find my device in my network.
One more thing - power button on the case do not working. I can press it but this does nothing - turn on/turn off/restart absolutely no reaction.

by **fvdw** » Wed Oct 20, 2021 8:35 am

The power button is not supported yet.
What do you see on serial interface when you use shutdown in the webinterface and what do you see when power on the nas after using shutdown of the web interface?

When you manage to get it running again, login using ssh client and on the command line give this command

Code: Select all: poweroff

Do you notice different output on serial interface and is the nas now continuing boot when powering on again?

by **Jocko** » Wed Oct 20, 2021 2:08 pm

matt_max wrote:Thank you @Jocko - problem with update is solved now.

Nice !
But now you have to install the patch for version 18.2, so that the firmware connects to our site rightly https://plugout.net/viewtopic.php?f=7&t=3149#p35893(fvdw-sl-18.2-patch03-03aug2021.zip)

by **matt_max** » Wed Oct 20, 2021 2:13 pm

Things are geting weirder. I can boot up normally only when I am connected to serial port. Here is the output from console:

Code: Select all: ▒▒ __ __ _ _ | \/ | __ _ _ ____ _____| | | | |\/| |/ _` | '__\ \ / / _ \ | | | | | | (_| | | \ V / __/ | | |_| |_|\__,_|_| \_/ \___|_|_| _ _ ____ _ | | | | | __ ) ___ ___ | |_ | | | |___| _ \ / _ \ / _ \| __| | |_| |___| |_) | (_) | (_) | |_ \___/ |____/ \___/ \___/ \__| ** LOADER ** ** MARVELL BOARD: DB-88F5182-EDmini-V2 LE U-Boot 1.1.1 (Sep 3 2008 - 07:36:51) Marvell version: 1.7.3 - LaCie version: 1. 3.4 DRAM CS[0] base 0x00000000 size 64MB DRAM Total size 64MB Flash: flashStructGet manu 0xff id 0xff [0kB@fff80000] ## Unknown FLASH at fff80000: Size = 0x00000000 = 0 MB Flash: 0 kB Addresses 20M - 0M are saved for the U-Boot usage. Mem malloc Initialization (20M - 16M): Done *** Warning - bad CRC, using default environment Soc: MV88F5182 Rev 2 CPU: ARM926 (Rev 0) running @ 400Mhz SysClock = 200Mhz , TClock = 166Mhz USB 0: host mode USB 1: device mode PCI 0: PCI Express Root Complex Interface PCI 1: Conventional PCI, speed = 33000000 Net: egiga0 [PRIME] Hit any key to stop autoboot: 0 Marvell>> ;0 0▒ __ __ _ _ | \/ | __ _ _ ____ _____| | | | |\/| |/ _` | '__\ \ / / _ \ | | | | | | (_| | | \ V / __/ | | |_| |_|\__,_|_| \_/ \___|_|_| _ _ ____ _ | | | | | __ ) ___ ___ | |_ | | | |___| _ \ / _ \ / _ \| __| | |_| |___| |_) | (_) | (_) | |_ \___/ |____/ \___/ \___/ \__| ** LOADER ** ** MARVELL BOARD: DB-88F5182-EDmini-V2 LE U-Boot 1.1.1 (Sep 3 2008 - 07:36:51) Marvell version: 1.7.3 - LaCie version: 1.3.4 DRAM CS[0] base 0x00000000 size 64MB DRAM Total size 64MB Flash: flashStructGet manu 0xff id 0xff [0kB@fff80000] ## Unknown FLASH at fff80000: Size = 0x00000000 = 0 MB Flash: 0 kB Addresses 20M - 0M are saved for the U-Boot usage. Mem malloc Initialization (20M - 16M): Done *** Warning - bad CRC, using default environment Soc: MV88F5182 Rev 2 CPU: ARM926 (Rev 0) running @ 400Mhz SysClock = 200Mhz , TClock = 166Mhz USB 0: host mode USB 1: device mode PCI 0: PCI Express Root Complex Interface PCI 1: Conventional PCI, speed = 33000000 Net: egiga0 [PRIME] Hit any key to stop autoboot: 0 Waiting for LUMP (2) Using egiga0 device no lump receive; continuing Reset IDE: Marvell Serial ATA Adapter Intergrated Sata device found StartChannel Device 1: OK Model: TOSHIBA HDWD120 Firm: MX4OACF0 Ser#: 78DJVT0CS Type: Hard Disk Supports 48-bit addressing Capacity: 1907729.0 MB = 1863.0 GB (-387938128 x 512) ** Bad partition - 1:9 1:9 ** Loading from IDE device 1, partition 6: Name: hdb6 Type: U-Boot Image Name: Linux-3.14.2 Created: 2015-05-16 21:33:54 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3873552 Bytes = 3.7 MB Load Address: 00008000 Entry Point: 00008000 ## Booting image at 00400000 ... Image Name: Linux-3.14.2 Created: 2015-05-16 21:33:54 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3873552 Bytes = 3.7 MB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK OK Starting kernel ... Uncompressing Linux... done, booting the kernel. [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 3.14.2 (root@fvdwsl-5big2.local) (gcc version 4.8.1 (GCC) ) #1 Sat May 16 23:32:53 CEST 2015 [ 0.000000] CPU: Feroceon [41069260] revision 0 (ARMv5TEJ), cr=a0053177 [ 0.000000] CPU: VIVT data cache, VIVT instruction cache [ 0.000000] Machine: LaCie Ethernet Disk mini V2 [ 0.000000] Clearing invalid memory bank 0KB@0xffffffff [ 0.000000] Clearing invalid memory bank 0KB@0xffffffff [ 0.000000] Clearing invalid memory bank 0KB@0xffffffff [ 0.000000] Ignoring unrecognised tag 0x00000000 [ 0.000000] Ignoring unrecognised tag 0x00000000 [ 0.000000] Ignoring unrecognised tag 0x00000000 [ 0.000000] Ignoring unrecognised tag 0x41000403 [ 0.000000] Memory policy: Data cache writeback [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256 [ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/sda7 ro [ 0.000000] PID hash table entries: 256 (order: -2, 1024 bytes) [ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) [ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Memory: 57116K/65536K available (5565K kernel code, 276K rwdata, 1544K rodata, 150K init, 244K bss, 8420K reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) [ 0.000000] vmalloc : 0xc4800000 - 0xff000000 ( 936 MB) [ 0.000000] lowmem : 0xc0000000 - 0xc4000000 ( 64 MB) [ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB) [ 0.000000] .text : 0xc0008000 - 0xc06f997c (7111 kB) [ 0.000000] .init : 0xc06fa000 - 0xc071fbf0 ( 151 kB) [ 0.000000] .data : 0xc0720000 - 0xc0765200 ( 277 kB) [ 0.000000] .bss : 0xc0765200 - 0xc07a2234 ( 245 kB) [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] NR_IRQS:64 [ 0.000020] sched_clock: 32 bits at 166MHz, resolution 6ns, wraps every 25769803770ns [ 7.641914] Console: colour dummy device 80x30 [ 7.641964] Calibrating delay loop... 265.42 BogoMIPS (lpj=1327104) [ 7.711650] pid_max: default: 32768 minimum: 301 [ 7.711980] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 7.712023] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 7.713171] CPU: Testing write buffer coherency: ok [ 7.713838] Setting up static identity map for 0x547f40 - 0x547f7c [ 7.718440] VFP support v0.3: not present [ 7.719800] NET: Registered protocol family 16 [ 7.720965] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 7.725411] Orion ID: MV88F5182-A2. TCLK=166666667. [ 7.731595] edmini_v2: USB device port, flash write and power-off are not yet supported. [ 7.809290] bio: create slab <bio-0> at 0 [ 7.811195] vgaarb: loaded [ 7.812921] SCSI subsystem initialized [ 7.816665] usbcore: registered new interface driver usbfs [ 7.817168] usbcore: registered new interface driver hub [ 7.817719] usbcore: registered new device driver usb [ 7.818867] Linux video capture interface: v2.00 [ 7.823601] cfg80211: Calling CRDA to update world regulatory domain [ 7.824347] Switched to clocksource orion_clocksource [ 7.870332] NET: Registered protocol family 2 [ 7.871482] TCP established hash table entries: 1024 (order: 0, 4096 bytes) [ 7.871561] TCP bind hash table entries: 1024 (order: 0, 4096 bytes) [ 7.871668] TCP: Hash tables configured (established 1024 bind 1024) [ 7.871815] TCP: reno registered [ 7.871861] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 7.871928] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 7.872362] NET: Registered protocol family 1 [ 7.872935] RPC: Registered named UNIX socket transport module. [ 7.872966] RPC: Registered udp transport module. [ 7.872989] RPC: Registered tcp transport module. [ 7.873013] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 7.873394] NetWinder Floating Point Emulator V0.97 (double precision) [ 7.877076] futex hash table entries: 256 (order: -1, 3072 bytes) [ 7.918894] VFS: Disk quotas dquot_6.5.2 [ 7.919896] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 7.934980] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 7.938201] NTFS driver 2.1.30 [Flags: R/W]. [ 7.939989] fuse init (API version 7.22) [ 7.944066] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled [ 7.954692] msgmni has been set to 111 [ 7.958113] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 7.958147] io scheduler noop registered [ 7.958172] io scheduler deadline registered [ 7.958279] io scheduler cfq registered (default) [ 7.977939] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled [ 8.000902] serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 3, base_baud = 10416666) is a 16550A [ 8.450455] console [ttyS0] enabled [ 8.483897] brd: module loaded [ 8.501765] loop: module loaded [ 8.505730] Uniform Multi-Platform E-IDE driver [ 8.511094] ide-gd driver 1.18 [ 8.519026] sata_mv sata_mv.0: cannot get optional clkdev [ 8.525404] sata_mv sata_mv.0: slots 32 ports 2 [ 8.540745] scsi0 : sata_mv [ 8.545398] scsi1 : sata_mv [ 8.549615] ata1: SATA max UDMA/133 irq 29 [ 8.553763] ata2: SATA max UDMA/133 irq 29 [ 8.561352] physmap platform flash device: 00080000 at fff80000 [ 8.567538] physmap-flash.0: Found 1 x16 devices at 0x0 in 8-bit bank. Manufacturer ID 0x0000c2 Chip ID 0x0000b9 [ 8.578245] Support for command set 0002 not present [ 8.583240] gen_probe: No supported Vendor Command Set found [ 8.589906] physmap-flash physmap-flash.0: map_probe failed [ 8.597651] tun: Universal TUN/TAP device driver, 1.6 [ 8.602737] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> [ 8.609512] ipddp.c:v0.01 8/28/97 Bradford W. Johnson <johns393@maroon.tc.umn.edu> [ 8.619035] ipddp0: Appletalk-IP Encap. mode by Bradford W. Johnson <johns393@maroon.tc.umn.edu> [ 8.636228] libphy: orion_mdio_bus: probed [ 8.640823] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4 [ 8.724702] mv643xx_eth_port mv643xx_eth_port.0 eth0: port 0 with MAC address 00:d0:4b:86:df:f3 [ 8.733847] PPP generic driver version 2.4.2 [ 8.739066] PPP Deflate Compression module registered [ 8.744164] PPP MPPE Compression module registered [ 8.748949] NET: Registered protocol family 24 [ 8.753961] usbcore: registered new interface driver rtl8187 [ 8.760200] usbcore: registered new interface driver rtl8192cu [ 8.766592] usbcore: registered new interface driver rt2500usb [ 8.772966] usbcore: registered new interface driver rt73usb [ 8.779134] usbcore: registered new interface driver rt2800usb [ 8.785011] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 8.792903] usbcore: registered new interface driver pegasus [ 8.799071] usbcore: registered new interface driver asix [ 8.804988] usbcore: registered new interface driver ax88179_178a [ 8.811560] usbcore: registered new interface driver cdc_ether [ 8.817926] usbcore: registered new interface driver net1080 [ 8.824100] usbcore: registered new interface driver cdc_subset [ 8.830536] usbcore: registered new interface driver ipheth [ 8.836701] usbcore: registered new interface driver cdc_ncm [ 8.845721] aoe: cannot create debugfs directory [ 8.850634] aoe: AoE v85 initialised. [ 8.854393] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 8.860907] ehci-pci: EHCI PCI platform driver [ 8.865916] ehci-orion: EHCI orion driver [ 8.870071] orion-ehci orion-ehci.0: EHCI Host Controller [ 8.875568] orion-ehci orion-ehci.0: new USB bus registered, assigned bus number 1 [ 8.883485] orion-ehci orion-ehci.0: irq 17, io mem 0xf1050000 [ 8.901660] orion-ehci orion-ehci.0: USB 2.0 started, EHCI 1.00 [ 8.907699] ata1: SATA link down (SStatus 0 SControl 300) [ 8.915961] hub 1-0:1.0: USB hub found [ 8.919788] hub 1-0:1.0: 1 port detected [ 8.925694] usbcore: registered new interface driver usblp [ 8.931853] usbcore: registered new interface driver usb-storage [ 8.938500] mousedev: PS/2 mouse device common for all mice [ 8.945329] i2c /dev entries driver [ 8.954899] rtc-rs5c372 0-0032: rs5c372a found, 24hr, driver version 0.6 [ 8.967111] rtc-rs5c372 0-0032: rtc core: registered rtc-rs5c372 as rtc0 [ 8.983033] uvcvideo: Unable to create debugfs directory [ 8.988885] usbcore: registered new interface driver uvcvideo [ 8.994663] USB Video Class driver (1.1.1) [ 8.998756] gspca_main: v2.14.0 registered [ 9.003409] usbcore: registered new interface driver Philips webcam [ 9.009669] Driver for 1-wire Dallas network protocol. [ 9.022692] Netfilter messages via NETLINK v0.30. [ 9.027520] nf_conntrack version 0.5.0 (892 buckets, 3568 max) [ 9.035101] ipip: IPv4 over IPv4 tunneling driver [ 9.042481] ip_tables: (C) 2000-2006 Netfilter Core Team [ 9.048081] TCP: cubic registered [ 9.055809] NET: Registered protocol family 10 [ 9.062515] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 9.068263] sit: IPv6 over IPv4 tunneling driver [ 9.075385] NET: Registered protocol family 17 [ 9.079870] NET: Registered protocol family 5 [ 9.084518] NET: Registered protocol family 37 [ 9.091256] console [netcon0] enabled [ 9.094963] netconsole: network logging started [ 9.101127] rtc-rs5c372 0-0032: setting system clock to 2021-10-20 13:06:22 UTC (1634735182) [ 9.961670] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 10.001716] ata2.00: ATA-8: TOSHIBA HDWD120, MX4OACF0, max UDMA/133 [ 10.007984] ata2.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 10.071733] ata2.00: configured for UDMA/133 [ 10.076684] scsi 1:0:0:0: Direct-Access ATA TOSHIBA HDWD120 MX4O PQ: 0 ANSI: 5 [ 10.086329] fvdw1 disk index before get_sd_name = 0 [ 10.091207] No LaCie disk map available [ 10.095082] fvdw2 disk index after get_sd_name = 0 [ 10.099864] fvdw3 prefix[0]=s prefix[1]=d [ 10.103973] fvdw4 diskname = sda [ 10.108668] sd 1:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB) [ 10.116453] sd 1:0:0:0: [sda] 4096-byte physical blocks [ 10.123488] sd 1:0:0:0: [sda] Write Protect is off [ 10.128693] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 10.190420] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 > [ 10.204715] sd 1:0:0:0: [sda] Attached SCSI disk [ 10.214408] kjournald starting. Commit interval 5 seconds [ 10.219984] EXT3-fs (sda7): mounted filesystem with ordered data mode [ 10.226502] VFS: Mounted root (ext3 filesystem) readonly on device 8:7. [ 10.234254] Freeing unused kernel memory: 148K (c06fa000 - c071f000) start rcS set global environment params mount proc remount root file system rw [ 10.635015] EXT3-fs (sda7): warning: checktime reached, running e2fsck is recommended [ 10.643281] EXT3-fs (sda7): using internal journal mount sysfs start boot log detect and set platform isp1 isp1 mount dev/pts update dev nodes booting using sda1 file system... [ 12.341933] kjournald starting. Commit interval 5 seconds [ 12.347859] EXT3-fs (sda1): using internal journal [ 12.371790] EXT3-fs (sda1): recovery complete [ 12.376158] EXT3-fs (sda1): mounted filesystem with ordered data mode start rcS set global environment params mount proc remount root file system rw mount sysfs start boot log detect and set platform isp1 isp1 mount dev/pts update dev nodes booting using sda1 root file system... enable IP forwarding... run udevstart to update dev nodes when necessary inserting kernel modules: [ 14.385258] iscsi_trgt: version magic '3.14.2 preempt mod_unload ARMv5 p2v8 ' should be '3.14.2 mod_unload ARMv5 p2v8 ' [ 14.431819] Loading iSCSI transport class v2.0-870. [ 14.449838] iscsi: registered transport (tcp) start buttons control daemon create temporary passwd file create temporary group file [ 15.091921] kjournald starting. Commit interval 5 seconds [ 15.097519] EXT3-fs (sda5): warning: checktime reached, running e2fsck is recommended [ 15.105683] EXT3-fs (sda5): using internal journal [ 15.121789] EXT3-fs (sda5): recovery complete [ 15.126157] EXT3-fs (sda5): mounted filesystem with ordered data mode Setting up swapspace version 1, size = 526413824 bytes [ 15.303538] random: mkswap urandom read with 119 bits of entropy available UUID=14ecc604-5265-416c-b6c7-768fc9199d95 [ 15.373796] Adding 514076k swap on /dev/sda3. Priority:-1 extents:1 across:514076k set samba environment for version 3.0.37 [ 15.862034] random: nonblocking pool is initialized mount: /sys/kernel/config: mount point does not exist. mkdir: can't create directory '/proc/bus/usb': No such file or directory mount: /proc/bus/usb/: mount point does not exist. configure loopback network interface setting reboot and standby phn adapting motion.conf file starting php based setup routines step 1 [ 28.794095] udevd (925): /proc/925/oom_adj is deprecated, please use /proc/925/oom_score_adj instead. [ 28.803503] udev: starting version 130 [ 38.951924] kjournald starting. Commit interval 5 seconds [ 38.979530] EXT3-fs (sda8): using internal journal [ 39.001792] EXT3-fs (sda8): recovery complete [ 39.006158] EXT3-fs (sda8): mounted filesystem with ordered data mode [ 40.832412] mv643xx_eth_port mv643xx_eth_port.0 eth0: link down [ 40.838781] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 43.823588] mv643xx_eth_port mv643xx_eth_port.0 eth0: link up, 1000 Mb/s, full duplex, flow control disabled [ 43.834172] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready start rpcbind service starting php based setup routines step2 starting php based setup routines step3 starting php based setup routines step banner php based setup routines finished web permission on resolv.conf set device tuning for dms performance move smbd en nmbd db files away from ram disk to prevent hanging samba server LED settings USER=root OLDPWD=/ HOME=/ RSYNC_RSH='/usr/bin/dbclient -p 22' TERM=vt102 PATH=/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/bin:/usr/local/sbin:/opt/bin:/opt/sbin PHILIPS=1 SHELL=/bin/sh PWD=/ isVM=0 ------------------------ rcS finished ------------------------ list boot.log file start boot log is a physical machine detect and set platform isp1 isp1 UIMAGE-3142-ISP1-1 Current kernel: 3.14.2 #1 Sat May 16 23:32:53 CEST 2015 isp1 isp1 mount dev/pts update dev nodes booting using sda1 root file system... enable IP forwarding... run udevstart to update dev nodes when necessary inserting kernel modules: modprobe: 'iscsi_trgt.ko': invalid module format start buttons control daemon device = isp1 source = buttons-nwsp2 buttons-nwsp2 daemon started Wed Oct 20 15:06:28 CEST 2021 create temporary passwd file create temporary group file set samba environment for version 3.0.37 configure loopback network interface setting reboot and standby isp1 rebootd-isp1 isp1 standbyd-isp1 phn adapting motion.conf file starting php based setup routines step 1 * Initialize the volatile db file... [ OK ] * Starting udevd... [ OK ] * Finishing restore RAID devices... [ OK ] * Found database configuration file... [ OK ] * Updating Disks database... [ OK ] * Starting mount of volumes... - Mounting volume Vol-A: [ OK ] * Finishing mount of volumes... [ OK ] * Generating Hosts File... [ OK ] * Configuring System Hostname... [ OK ] * Configuring LAN interface... [ OK ] * Initializing Timezone... [ OK ] * Starting web server... [ OK ] * Starting mount of internal USB ... * Finishing mount internal USB ... [ OK ] * Configuring Disks... [ OK ] * Configuring Samba... [ OK ] * Configuring System Users... Root password: use default password Set users, linux and samba accounts [ OK ] * Starting Fvdw-sl Discovery Daemon... [ OK ] start rpcbind service starting php based setup routines step 2 * Starting dropbear... [ OK ] * Kill temporary dropbear... [ OK ] starting php based setup routines step 3 * Starting daemon update Hosts File... [ OK ] * Starting mount of remote shares... * Finishing mount shares... [ OK ] * Starting NTP client... [ OK ] starting php based setup routines step banner *** fvdw-sl NAS firmware This is fvdw-sl version: fvdw-sl 18.2 patched built on: October 18 2019 LAN IP address: 10.1.1.7 (static) Port configuration: LAN -> eth0 php based setup routines finished web permission on resolv.conf set device tuning for dms performance move smbd en nmbd db files away from ram disk to prevent hanging samba server LED settings else loop1 finished rcS finished ------------------------ rcS finished ------------------------ list boot.log file start boot log is a physical machine detect and set platform isp1 isp1 UIMAGE-3142-ISP1-1 Current kernel: 3.14.2 #1 Sat May 16 23:32:53 CEST 2015 isp1 isp1 mount dev/pts update dev nodes booting using sda1 file system... else loop1 finished rcS finished

Then I can log into the web console or ssh. Putty show nothing on screen when I run poweroff command - just window with standard info "Remote side unexpectedly closed network connection".
In serial port window I've got:

Code: Select all: list boot.log file start boot log is a physical machine detect and set platform isp1 isp1 UIMAGE-3142-ISP1-1 Current kernel: 3.14.2 #1 Sat May 16 23:32:53 CEST 2015 isp1 isp1 mount dev/pts update dev nodes booting using sda1 file system... else loop1 finished rcS finished params.c:OpenConfFile() - Unable to open configuration file "/usr/lib/smb.conf": No such file or directory ERROR: Failed to initialise messages database killall: zfs: no process killed killall: zxtract: no process killed killall: zappdms: no process killed killall: udhcpc: no process killed killall: syncawayd: no process killed killall: ntpd: no process killed killall: fanctld: no process killed The system is going down NOW! Sent SIGTERM to all processes Sent SIGKILL to all processes Requesting system poweroff [ 454.531912] sd 1:0:0:0: [sda] Synchronizing SCSI cache [ 454.571848] sd 1:0:0:0: [sda] Stopping disk [ 455.172395] reboot: System halted

Then when I disconnect power and connect it back (without serial port connected) lights turn on and nothing else. But if I connect serial port and do the power reconnection - everything starts as usual.

Second strange behavior: I'm not able to reinstall fvdw. When I turn on FVDW console and click on Action->Install fvdw-sl firmware, select proper kernel (UIMAGE-3136-ISP1-14-standalone) then u-boot console appears and then I turn on NAS but I can wait forever to connection. There is only waiting for u-boot.. message.

Third thing: even if I was able to update to 18.2 version (thx to @Jocko) I cannot install Transmission server:
Fail: can not retrieve the package, -99

Small update: after applying patch fvdw-sl-18.2-patch03-03aug2021 I was able to install Transmission server - thank you @Jocko.

by **fvdw** » Wed Oct 20, 2021 8:05 pm

I see nothing strange in the output.
So why it doesn't boot without serial port connected is a mystery. Only thing I can think on is that the serial port grounds the mainboard via gnd line and that is affecting the boot.
To test remove the rx and tx cable and keep gnd connected and see if it boots

by **matt_max** » Thu Oct 21, 2021 11:52 am

After I remove RX and TX cable and only GND was connected NAS doesn't boot. Whan I connect back RX and TX and hit Enter Marvell>> prompt appears in serial connection window (putty). But boot process doesn't start. I have to disconnect power and connect it back.

P.S. When I run boot command after Marvell>> prompt - system starts normally.

by **fvdw** » Thu Oct 21, 2021 3:19 pm

:dontknow seems autoboot fails to continu boot. I do not know why it fails now and not in the past but maybe the nas ethernet port or other hardware is not ready in time before autoboot tries to continue (capacitor issue??). We could try to set the delay value for autoboot to a bigger value then 0 seconds to give nas more time to initialize the hardware.
When you are at the marvell>> prompt give command

Code: Select all: printenv

to see which variables are available and which most likely is the delay value for autoboot. Remark there is a possibility that the delay time is hard coded in uboot. In that case setting the delay to another value will be reset at boot. But we can try.

by **matt_max** » Fri Oct 22, 2021 8:42 am

This is the output form serial console after reboot (failed):

Code: Select all: Marvell>> printenv bootargs=console=ttyS0,115200 root=/dev/sda7 ro bootcmd=if lump 2; then ; else run disk_disk; fi baudrate=115200 loads_echo=0 kernel_addr=0x400000 boot_disk=disk ${kernel_addr} 1:6 snap_disk=if snapboot 1:9 ${kernel_addr}; then; else run boot_disk; fi disk_disk=ide reset; run snap_disk; bootm ${kernel_addr}; ethaddr=00:d0:4b:86:df:f3 stdin=serial stdout=serial stderr=serial cpuName=926 CASset=min enaMonExt=no enaFlashBuf=yes enaCpuStream=no MALLOC_len=4 ethprime=egiga0 bootdelay=3 disaMvPnp=no overEthAddr=no usb0Mode=host usb1Mode=device ethact=egiga0 Environment size: 558/40956 bytes

I think we should focus on that line: bootcmd=if lump 2; then ; else run disk_disk; fi

P.S. if I run boot next I can see something like this:

Code: Select all: Marvell>> boot Waiting for LUMP (2) Using egiga0 device no lump receive; continuing Reset IDE: Marvell Serial ATA Adapter Intergrated Sata device found StartChannel

What is LUMP? :dontknow

by **fvdw** » Fri Oct 22, 2021 12:44 pm

Lump is a signal received on the ethernet port. The fvdw-sl console uses it to interrupt boot.

What you could try is setting bootdelay to a higher value
At the marvell prompt give these commands

Code: Select all: set bootdelay=5 saveenv

And reboot (command reset at marvell prompt)
And see what happens.
If again stuck at marvell prompt give command printenv to see if bootdelay is still at 5 seconds or reset to 3.

by **matt_max** » Fri Oct 22, 2021 1:13 pm

When serial port is connected I have never stuck at Marvell prompt - always go straight to boot process.

I tried to set up bootdelay but that was the output from console:

Code: Select all: Marvell>> set bootdelay=5 Marvell>> saveenv Saving Environment to Flash... Error: start and/or end address not on sector boundary Marvell>>

...and after restart printenv shows that bootdelay is set up to 3.

I think that my Lacie for some reason never receive ide reset signal during early boot stage. For example here:

Code: Select all: bootcmd=if lump 2; then ; else run disk_disk; fi

and all this part

Code: Select all: boot_disk=disk ${kernel_addr} 1:6 snap_disk=if snapboot 1:9 ${kernel_addr}; then; else run boot_disk; fi disk_disk=ide reset; run snap_disk; bootm ${kernel_addr};

plugout.net

mainboard fix

Re: mainboard fix

Re: mainboard fix

Re: mainboard fix

Re: mainboard fix

Re: mainboard fix

Re: mainboard fix

Re: mainboard fix

Re: mainboard fix

Re: mainboard fix

Re: mainboard fix

Who is online