If it is an
internet space 2 (isp2) then you could try to use the experimental 2.6.39.4 kernel that I made for the nwsp2 classic and lite. I also included support for the isp2 but I never tested so far as I don't have one.
So I gues you will be the volunteer. :mrgreen:
viewtopic.php?f=4&t=223The internet space 2 also has a kirkwood processor and mainboard similar to nwsp2 and as result the isp1 kernel won't run on this device.
So download this 2.6.39.4 kernel from the development section and write that to sda6 using the dd command as described in the manual and see if the magic happens.
I guess you should also use the fvdw-sl disk image of the nwsp2, but it is not much different from that for the isp1. Only buttons and standy and reboot commands are different. I would try that later. If the kernel is right for this hardware it should boot also with the isp1 disk image and you can check if reboot etc works or not.