Jocko wrote:Hi
This may happen when php/apache fails to create the session file in tmp directory when you open the firmware interface.
That would mean either you did not have the expected permissions on it or sda5 is mis-mounted.
So open a shell window, and post these output
- Code: Select all
cat /boot.log
mount
df /rw_fs
ls -al /rw_fs/tmp
here ist the output.:
login as: root
root@192.168.0.49's password:
Bus error
root@fvdwsl-base2:/ # cat /boot.log
start boot log
is a physical machine
detect and set platform
nwsp2
kirkwood
UIMAGE-414133-KIRKWOOD-1
Current kernel: 4.14.133 #1 PREEMPT Wed Jul 17 14:46:56 CEST 2019
device nwsp2
family kirkwood
mount dev/pts
update dev nodes
booting using sda1 root file system...
enable IP forwarding...
run udevstart to update dev nodes when necessary
inserting kernel modules:
modprobe: module 'iscsi_trgt' not found
start buttons control daemon
device = nwsp2
source = buttons-nwsp2
buttons-nwsp2 daemon started
Keep old Min free memory=2000
Sat Sep 23 12:08:07 CEST 2023
configuration partition is rightly mounted
create temporary passwd file
create temporary group file
set samba environment for version 3.0.37
configure loopback network interface
setting reboot and standby
nwsp2
rebootd-nwsp2
nwsp2
standbyd-nwsp2
starting php based setup routines step 1
* Initialize the volatile db file... [ OK ]
* Starting udevd... [ OK ]
* Finishing restore RAID devices... [ OK ]
* Found database configuration file... [ OK ]
* Updating Disks database... [ OK ]
* Starting mount of volumes...
- Mounting volume Vol-A: [ OK ]
* Finishing mount of volumes... [ OK ]
* Generating Hosts File... [ OK ]
* Configuring System Hostname... [ OK ]
* Configuring LAN interface... [ OK ]
* Initializing Timezone... [ OK ]
* Starting web server... [ OK ]
* Starting mount of internal USB ...
* Finishing mount internal USB ... [ OK ]
* Configuring Disks... [ OK ]
* Configuring Samba... [ OK ]
* Configuring System Users...
Root password: use default password
Set users, linux and samba accounts [ OK ]
* Starting Fvdw-sl Discovery Daemon... [ OK ]
start rpcbind service
starting php based setup routines step 2
* Starting dropbear... [ OK ]
* Kill temporary dropbear... [ OK ]
Warning: unlink(/var/run/lock/1.lock): Read-only file system in /etc/finc/sysfunc_gen_unlock.finc on line 34
Warning: unlink(//rw_fs/tmp/booting): Read-only file system in /etc/finc/set_booting.finc on line 35
starting php based setup routines step 3