plugout.net

by **galaberta** » Mon Dec 12, 2022 9:50 pm

Hi there,
Minidlna stopped working. I am in 18.2, bécame a donator and everything went well.
But now, ir says server si installed, server is installed (1.2.1#5)
but it says server si not running. I press start server , it says succesfull, but still shows server si not running…
Can you please help me Wish this issue? I restarted the NAS, but i got the same issue.
Thanks
Francisco

by **Jocko** » Tue Dec 13, 2022 9:51 am

Hi

if you try to re-install minidlna (just click again on the Install button), what happens ?

by **galaberta** » Tue Dec 13, 2022 9:40 pm

Hi Jocko,
I tried, and the message I got is: Ok: install command successful (1.2.1#5)
However, it still says server is not running
I press start server and it says Ok: start command with rescan successfully
But in status it still says: server is not running
any ideas?
Thanks for your help

by **galaberta** » Tue Dec 13, 2022 9:42 pm

Also, just in case it helps, I pressed stop server and i got: Fail: Server was not running, server status adjusted (30)

I pressed start server, and i got the same…
Thanks!

by **pchamorro** » Tue Dec 13, 2022 11:55 pm

Most if not all of the media servers available for FVDWSL are either inactive or proprietary.
It would be great if FVDWSL instead supported Jellyfin as it is active and open with good playback client support for all major platforms.

by **Jocko** » Wed Dec 14, 2022 8:19 am

Hi galaberta,

So need to investigate.
Open a shell window (ssh access), and enable the debug mode

Code: Select all: debugon

return to minidlna menu and try to start. After getting a not running status, stop the debug mode and post the outputs

Code: Select all: debugoff ps axf cat /var/log/messages

by **galaberta** » Wed Dec 14, 2022 10:10 pm

Hi Jocko,
Here you are the outcome:

Code: Select all: root@galaberta:/ # ps axf PID TTY STAT TIME COMMAND 2 ? S 0:00 [kthreadd] 4 ? I< 0:00 \_ [kworker/0:0H] 6 ? I< 0:00 \_ [mm_percpu_wq] 7 ? S 0:02 \_ [ksoftirqd/0] 8 ? I 0:05 \_ [rcu_preempt] 9 ? I 0:00 \_ [rcu_sched] 10 ? I 0:00 \_ [rcu_bh] 11 ? I< 0:00 \_ [netns] 12 ? I 0:00 \_ [kworker/u2:1] 279 ? S 0:00 \_ [oom_reaper] 280 ? I< 0:00 \_ [writeback] 282 ? I< 0:00 \_ [crypto] 283 ? I< 0:00 \_ [kintegrityd] 285 ? I< 0:00 \_ [kblockd] 291 ? I< 0:00 \_ [ata_sff] 309 ? I< 0:00 \_ [md] 401 ? I< 0:00 \_ [rpciod] 402 ? I< 0:00 \_ [xprtiod] 403 ? S 0:00 \_ [kswapd0] 415 ? I< 0:00 \_ [nfsiod] 416 ? I< 0:00 \_ [cifsiod] 417 ? I< 0:00 \_ [cifsoplockd] 418 ? S 0:00 \_ [jfsIO] 422 ? S 0:00 \_ [jfsCommit] 423 ? S 0:00 \_ [jfsSync] 424 ? I< 0:00 \_ [xfsalloc] 425 ? I< 0:00 \_ [xfs_mru_cache] 568 ? S 0:00 \_ [scsi_eh_0] 569 ? I< 0:00 \_ [scsi_tmf_0] 572 ? S 0:00 \_ [scsi_eh_1] 573 ? I< 0:00 \_ [scsi_tmf_1] 576 ? I 0:00 \_ [kworker/u2:2] 577 ? I< 0:00 \_ [smflush] 578 ? S 0:00 \_ [spi0] 653 ? S< 0:00 \_ [aoe_tx0] 654 ? S< 0:00 \_ [aoe_ktio0] 677 ? I< 0:00 \_ [raid5wq] 680 ? I< 0:00 \_ [dm_bufio_cache] 681 ? I< 0:00 \_ [kmpathd] 682 ? I< 0:00 \_ [kmpath_handlerd] 699 ? I< 0:00 \_ [ipv6_addrconf] 703 ? I< 0:00 \_ [dsa_ordered] 731 ? I< 0:00 \_ [kworker/0:1H] 732 ? S 0:00 \_ [jbd2/sda7-8] 733 ? I< 0:00 \_ [ext4-rsv-conver] 749 ? S 0:00 \_ [jbd2/sda1-8] 750 ? I< 0:00 \_ [ext4-rsv-conver] 782 ? I< 0:00 \_ [iscsi_eh] 806 ? S 0:00 \_ [jbd2/sda5-8] 807 ? I< 0:00 \_ [ext4-rsv-conver] 1310 ? S 0:00 \_ [jbd2/sda8-8] 1311 ? I< 0:00 \_ [ext4-rsv-conver] 3816 ? I 0:00 \_ [kworker/0:2] 3888 ? I 0:00 \_ [kworker/0:0] 3909 ? I 0:00 \_ [kworker/0:1] 1 ? Ss 0:02 init 791 ? Ss 0:00 /usr/sbin/buttonsd 970 ? S<s 0:00 /sbin/udevd --daemon 1355 ? Ss 0:00 /sbin/udhcpc -b -i eth0 -s /etc/api/api_dhcpc.php dhc 1382 ? Ss 0:06 /usr/bin/httpd -f httpd.conf -d /etc 1383 ? S 0:47 \_ /usr/bin/httpd -f httpd.conf -d /etc 1646 ? S 0:34 \_ /usr/bin/httpd -f httpd.conf -d /etc 1386 ? Ss 1:10 /usr/sbin/noflushd -n 15 /dev/sda 1410 ? Ss 0:00 /usr/bin/discoverd 1418 ? Ss 0:00 /usr/bin/rpcbind 1436 ? Ss 0:00 dropbear -p 22 -r /rw_fs/etc/dropbear/dropbear_rsa_ho 3908 ? Ss 0:00 \_ dropbear -p 22 -r /rw_fs/etc/dropbear/dropbear_rs 3910 pts/0 Ss 0:00 \_ -sh 3986 pts/0 R+ 0:00 \_ ps axf 1475 ? Ss 0:00 /usr/sbin/hostd 7200 1553 ? Ss 0:18 /usr/sbin/nmbd -D -l /var/log/samba 1555 ? Ss 0:01 /usr/sbin/smbd -D -l /var/log/samba 1563 ? S 0:00 \_ /usr/sbin/smbd -D -l /var/log/samba 1564 ? S 0:00 \_ /usr/sbin/smbd -D -l /var/log/samba root@galaberta:/ # cat /var/log/messages Jan 3 13:26:19 galaberta syslog.info syslogd started: BusyBox v1.21.0 Jan 3 13:26:34 galaberta local0.warn API[2018/01/03 13:26:34] nasapi.inc(36)[1383]: nasapi: lock time = 0 Jan 3 13:26:35 galaberta local0.warn API[2018/01/03 13:26:35] nasapi.inc(49)[1383]: calling 'mrvlGetVolumeAddons' Jan 3 13:26:35 galaberta local0.warn API[2018/01/03 13:26:35] nasapi.inc(484)[1383]: mrvlGetVolumeAddons Return Code: 1000 Jan 3 13:26:35 galaberta local0.warn API[2018/01/03 13:26:35] nasapi.inc(36)[1383]: nasapi: lock time = 0 Jan 3 13:26:35 galaberta local0.warn API[2018/01/03 13:26:35] nasapi.inc(49)[1383]: calling 'mrvlMinidlnaServer installed' Jan 3 13:26:35 galaberta local0.warn API[2018/01/03 13:26:35] nasapi.inc(484)[1383]: mrvlMinidlnaServer Return Code: 1 Jan 3 13:26:35 galaberta local0.warn API[2018/01/03 13:26:35] nasapi.inc(36)[1383]: nasapi: lock time = 0 Jan 3 13:26:35 galaberta local0.warn API[2018/01/03 13:26:35] nasapi.inc(49)[1383]: calling 'mrvlMinidlnaServer running' Jan 3 13:26:35 galaberta local0.warn API[2018/01/03 13:26:35] nasapi.inc(484)[1383]: mrvlMinidlnaServer Return Code: Jan 3 13:26:35 galaberta local0.warn API[2018/01/03 13:26:35] nasapi.inc(36)[1383]: nasapi: lock time = 0 Jan 3 13:26:35 galaberta local0.warn API[2018/01/03 13:26:35] nasapi.inc(49)[1383]: calling 'mrvlMinidlnaServer hasupdate' Jan 3 13:26:35 galaberta authpriv.notice sudo: nobody : TTY=unknown ; PWD=/usr/htdocs/global ; USER=root ; COMMAND=/usr/bin/unlink /tmp/addons-url Jan 3 13:26:35 galaberta local0.warn API[2018/01/03 13:26:35] nasapi.inc(481)[1383]: mrvlMinidlnaServer Return Code: Array():md5 => dc6a7f531a5fdcb0d8565191d205a89d... Jan 3 13:26:51 galaberta local0.warn API[2018/01/03 13:26:51] nasapi.inc(36)[1383]: nasapi: lock time = 0 Jan 3 13:26:51 galaberta local0.warn API[2018/01/03 13:26:51] nasapi.inc(49)[1383]: calling 'mrvlGetVolumeAddons' Jan 3 13:26:51 galaberta local0.warn API[2018/01/03 13:26:51] nasapi.inc(484)[1383]: mrvlGetVolumeAddons Return Code: 1000 Jan 3 13:26:51 galaberta local0.warn API[2018/01/03 13:26:51] nasapi.inc(36)[1383]: nasapi: lock time = 0 Jan 3 13:26:51 galaberta local0.warn API[2018/01/03 13:26:51] nasapi.inc(49)[1383]: calling 'mrvlMinidlnaServer installed' Jan 3 13:26:51 galaberta local0.warn API[2018/01/03 13:26:51] nasapi.inc(484)[1383]: mrvlMinidlnaServer Return Code: 1 Jan 3 13:26:51 galaberta local0.warn API[2018/01/03 13:26:51] nasapi.inc(36)[1383]: nasapi: lock time = 0 Jan 3 13:26:51 galaberta local0.warn API[2018/01/03 13:26:51] nasapi.inc(49)[1383]: calling 'mrvlMinidlnaServer start' Jan 3 13:26:51 galaberta authpriv.notice sudo: nobody : TTY=unknown ; PWD=/usr/htdocs/global ; USER=root ; COMMAND=/bin/sh -c chown rd:rd /usr/local/bin/minidlna;chmod 6755 /usr/local/bin/minidlna;/usr/local/bin/minidlna -R -f '/direct-usb/minidlna/minidlna.conf' -P '/var/r Jan 3 13:26:52 galaberta authpriv.notice sudo: nobody : TTY=unknown ; PWD=/usr/htdocs/global ; USER=root ; COMMAND=/bin/chmod 777 /direct-usb/minidlna/minidlna.conf Jan 3 13:26:52 galaberta local0.warn API[2018/01/03 13:26:52] nasapi.inc(484)[1383]: mrvlMinidlnaServer Return Code: 0 Jan 3 13:26:52 galaberta local0.warn API[2018/01/03 13:26:52] nasapi.inc(36)[1383]: nasapi: lock time = 0 Jan 3 13:26:52 galaberta local0.warn API[2018/01/03 13:26:52] nasapi.inc(49)[1383]: calling 'mrvlMinidlnaServer running' Jan 3 13:26:52 galaberta local0.warn API[2018/01/03 13:26:52] nasapi.inc(484)[1383]: mrvlMinidlnaServer Return Code: Jan 3 13:26:52 galaberta local0.warn API[2018/01/03 13:26:52] nasapi.inc(36)[1383]: nasapi: lock time = 0 Jan 3 13:26:52 galaberta local0.warn API[2018/01/03 13:26:52] nasapi.inc(49)[1383]: calling 'mrvlMinidlnaServer hasupdate' Jan 3 13:26:52 galaberta local0.warn API[2018/01/03 13:26:52] nasapi.inc(481)[1383]: mrvlMinidlnaServer Return Code: Array():md5 => dc6a7f531a5fdcb0d8565191d205a89d... Jan 3 13:26:55 galaberta local0.warn API[2018/01/03 13:26:55] nasapi.inc(36)[1646]: nasapi: lock time = 0 Jan 3 13:26:56 galaberta local0.warn API[2018/01/03 13:26:56] nasapi.inc(49)[1646]: calling 'mrvlGetVolumeAddons' Jan 3 13:26:56 galaberta local0.warn API[2018/01/03 13:26:56] nasapi.inc(484)[1646]: mrvlGetVolumeAddons Return Code: 1000 Jan 3 13:26:56 galaberta local0.warn API[2018/01/03 13:26:56] nasapi.inc(36)[1646]: nasapi: lock time = 0 Jan 3 13:26:56 galaberta local0.warn API[2018/01/03 13:26:56] nasapi.inc(49)[1646]: calling 'mrvlMinidlnaServer installed' Jan 3 13:26:56 galaberta local0.warn API[2018/01/03 13:26:56] nasapi.inc(484)[1646]: mrvlMinidlnaServer Return Code: 1 Jan 3 13:26:56 galaberta local0.warn API[2018/01/03 13:26:56] nasapi.inc(36)[1646]: nasapi: lock time = 0 Jan 3 13:26:56 galaberta local0.warn API[2018/01/03 13:26:56] nasapi.inc(49)[1646]: calling 'mrvlMinidlnaServer stop' Jan 3 13:26:56 galaberta authpriv.notice sudo: nobody : TTY=unknown ; PWD=/usr/htdocs/global ; USER=root ; COMMAND=/usr/bin/killall -9 minidlna Jan 3 13:26:56 galaberta authpriv.notice sudo: nobody : TTY=unknown ; PWD=/usr/htdocs/global ; USER=root ; COMMAND=/usr/bin/unlink /var/run/minidlna.pid Jan 3 13:26:56 galaberta local0.warn API[2018/01/03 13:26:56] sysfunc_minidlna_server.finc(189)[1646]: Error: stop minidlna [killall -9 minidlna > /dev/null 2>&1] failed (1). Jan 3 13:26:56 galaberta local0.warn API[2018/01/03 13:26:56] nasapi.inc(484)[1646]: mrvlMinidlnaServer Return Code: 30 Jan 3 13:26:56 galaberta local0.warn API[2018/01/03 13:26:56] nasapi.inc(36)[1646]: nasapi: lock time = 0 Jan 3 13:26:56 galaberta local0.warn API[2018/01/03 13:26:56] nasapi.inc(49)[1646]: calling 'mrvlMinidlnaServer running' Jan 3 13:26:56 galaberta local0.warn API[2018/01/03 13:26:56] nasapi.inc(484)[1646]: mrvlMinidlnaServer Return Code: Jan 3 13:26:56 galaberta local0.warn API[2018/01/03 13:26:56] nasapi.inc(36)[1646]: nasapi: lock time = 0 Jan 3 13:26:56 galaberta local0.warn API[2018/01/03 13:26:56] nasapi.inc(49)[1646]: calling 'mrvlMinidlnaServer hasupdate' Jan 3 13:26:56 galaberta local0.warn API[2018/01/03 13:26:56] nasapi.inc(481)[1646]: mrvlMinidlnaServer Return Code: Array():md5 => dc6a7f531a5fdcb0d8565191d205a89d... Jan 3 13:26:59 galaberta local0.warn API[2018/01/03 13:26:59] nasapi.inc(36)[1383]: nasapi: lock time = 0 Jan 3 13:27:00 galaberta local0.warn API[2018/01/03 13:27:00] nasapi.inc(49)[1383]: calling 'mrvlGetVolumeAddons' Jan 3 13:27:00 galaberta local0.warn API[2018/01/03 13:27:00] nasapi.inc(484)[1383]: mrvlGetVolumeAddons Return Code: 1000 Jan 3 13:27:00 galaberta local0.warn API[2018/01/03 13:27:00] nasapi.inc(36)[1383]: nasapi: lock time = 0 Jan 3 13:27:00 galaberta local0.warn API[2018/01/03 13:27:00] nasapi.inc(49)[1383]: calling 'mrvlMinidlnaServer installed' Jan 3 13:27:00 galaberta local0.warn API[2018/01/03 13:27:00] nasapi.inc(484)[1383]: mrvlMinidlnaServer Return Code: 1 Jan 3 13:27:00 galaberta local0.warn API[2018/01/03 13:27:00] nasapi.inc(36)[1383]: nasapi: lock time = 0 Jan 3 13:27:00 galaberta local0.warn API[2018/01/03 13:27:00] nasapi.inc(49)[1383]: calling 'mrvlMinidlnaServer start' Jan 3 13:27:00 galaberta authpriv.notice sudo: nobody : TTY=unknown ; PWD=/usr/htdocs/global ; USER=root ; COMMAND=/bin/sh -c chown rd:rd /usr/local/bin/minidlna;chmod 6755 /usr/local/bin/minidlna;/usr/local/bin/minidlna -R -f '/direct-usb/minidlna/minidlna.conf' -P '/var/r Jan 3 13:27:00 galaberta authpriv.notice sudo: nobody : TTY=unknown ; PWD=/usr/htdocs/global ; USER=root ; COMMAND=/bin/chmod 777 /direct-usb/minidlna/minidlna.conf Jan 3 13:27:00 galaberta local0.warn API[2018/01/03 13:27:00] nasapi.inc(484)[1383]: mrvlMinidlnaServer Return Code: 0 Jan 3 13:27:00 galaberta local0.warn API[2018/01/03 13:27:00] nasapi.inc(36)[1383]: nasapi: lock time = 0 Jan 3 13:27:00 galaberta local0.warn API[2018/01/03 13:27:00] nasapi.inc(49)[1383]: calling 'mrvlMinidlnaServer running' Jan 3 13:27:00 galaberta local0.warn API[2018/01/03 13:27:00] nasapi.inc(484)[1383]: mrvlMinidlnaServer Return Code: Jan 3 13:27:00 galaberta local0.warn API[2018/01/03 13:27:00] nasapi.inc(36)[1383]: nasapi: lock time = 0 Jan 3 13:27:00 galaberta local0.warn API[2018/01/03 13:27:00] nasapi.inc(49)[1383]: calling 'mrvlMinidlnaServer hasupdate' Jan 3 13:27:00 galaberta local0.warn API[2018/01/03 13:27:00] nasapi.inc(481)[1383]: mrvlMinidlnaServer Return Code: Array():md5 => dc6a7f531a5fdcb0d8565191d205a89d... Jan 3 13:27:13 galaberta syslog.info syslogd exiting root@galaberta:/ #

Thanks!

by **Jocko** » Thu Dec 15, 2022 8:59 am

Hi

So nothing wrong on the firmware side, all steps run rightly. It seems minidlna stops immediately after starting. This may happen if minidlna conf file is corrupted or its database.

But it is not an issue on the database because the start command uses the option '-R' which means the data file is missing and we force to rebuild it. I believe the issue is on the conf file.

So an additional checks and new attempts. please to post the outputs

Code: Select all: ldd /usr/local/bin/minidlna (check if there is no dependency issue) ls -al /direct-usb/minidlna/database/files.db (datafile exists ?)

Load minidlna menu and click on "Minidlna Configure". Restore the default settings and select again your media streaming. Save your change. This would repair the conf file.
Then try again to start minidlna and check a bit later if it is still running

Code: Select all: px axf

(no need the debug mode)

by **galaberta** » Sat Dec 17, 2022 12:14 pm

Hi Jocko,
no success... I press the "default settings" button and it says "Failed: restoring default configuration file failed"

this is the outcome of the commands you told me to type:

Code: Select all: root@galaberta:/ # ldd /usr/local/bin/minidlna libjpeg.so.62 => /usr/lib/libjpeg.so.62 (0xb6f63000) libid3tag.so.0 => /usr/lib/libid3tag.so.0 (0xb6f4c000) libsqlite3.so.0 => /usr/lib/libsqlite3.so.0 (0xb6eba000) libavformat.so.57 => /usr/local/lib/libavformat.so.57 (0xb6cba000) libavutil.so.55 => /usr/local/lib/libavutil.so.55 (0xb6c2b000) libexif.so.12 => /opt/lib/libexif.so.12 (0xb6bf1000) libFLAC.so.8 => /opt/lib/libFLAC.so.8 (0xb6ba7000) libvorbis.so.0 => /opt/lib/libvorbis.so.0 (0xb6b73000) libogg.so.0 => /opt/lib/libogg.so.0 (0xb6b67000) libavahi-client.so.3 => /usr/lib/libavahi-client.so.3 (0xb6b51000) libavahi-common.so.3 => /usr/lib/libavahi-common.so.3 (0xb6b3d000) libpthread.so.0 => /lib/libpthread.so.0 (0xb6b1d000) libc.so.6 => /lib/libc.so.6 (0xb69e1000) libz.so.1 => /usr/lib/libz.so.1 (0xb69c1000) libdl.so.2 => /lib/libdl.so.2 (0xb69b6000) libgcc_s.so.1 => /usr/lib/libgcc_s.so.1 (0xb698f000) libavcodec.so.57 => /usr/local/lib/libavcodec.so.57 (0xb56c0000) libm.so.6 => /lib/libm.so.6 (0xb5618000) libbz2.so.1.0 => /usr/lib/libbz2.so.1.0 (0xb55ff000) libdbus-1.so.3 => /usr/lib/libdbus-1.so.3 (0xb55bd000) libssp.so.0 => /usr/lib/libssp.so.0 (0xb55b3000) /lib/ld-linux.so.3 (0xb6f8a000) libswresample.so.2 => /usr/local/lib/libswresample.so.2 (0xb5595000) liblzma.so.5 => /usr/lib/liblzma.so.5 (0xb556e000) root@galaberta:/ # ls -al /direct-usb/minidlna/database/files.db ls: /direct-usb/minidlna/database/files.db: No such file or directory root@galaberta:/ # px axf -sh: px: not found

Thanks!

by **Jocko** » Sat Dec 17, 2022 12:38 pm

Sorry I made a mistake. :dry
So

Code: Select all: ps axf

But it must be run only after resetting minidlna configuration and starting the server

plugout.net

Minidlna stopped working

Minidlna stopped working

Re: Minidlna stopped working

Re: Minidlna stopped working

Re: Minidlna stopped working

Re: Minidlna stopped working

Re: Minidlna stopped working

Re: Minidlna stopped working

Re: Minidlna stopped working

Re: Minidlna stopped working

Re: Minidlna stopped working

Who is online