Problem finding Nas after upgrading to new firmware version

[leone101]

Yes sure....
so i just plug new 14tb hd in Nas.....without power plug...i select on console "install fvdw-sl firmware"......i select "standalone kirkwood kernel" as before....plu power and wait boot and after i continue with istructions that progream give it to me....right?
i read that should not have any problems with gpt partitions with big HD...right?
i will wait your ok to try
thanks

[fvdw]

Yes that is the way you should do it

[leone101]

all was ok till it started formatting sda8....the bigger one.....
what happened?

[fvdw]

Mmm seems mke2fs of mini- glibc has a problem with the disk size.
Just boot the firmware and try to initialize sda8 using web interface (disk setup menu)

[leone101]

i finally reach to format partiton 8 trough webexplorer...
now i was trying to configure system OS but first of all i would upgrade to 18.2 but i can't do it trough server because retreive me error.
i readed this links:
https://plugout.net/viewtopic.php?f=7&t ... 895#p35895
https://plugout.net/viewtopic.php?f=7&t=3149#p36493

but is not clear to me how to install upgrade manually and if i can reach to make it automatically from server on this nas.
I can't also install webetools (Fail: install command failed, -98) or mediaservers (instal command failed 17)because everytime i try it give me these errors message

[fvdw]

To be able to install 18-2 via web interface you must install the patch given in this topic
https://plugout.net/viewtopic.php?f=7&t=3078&p=35895#p35895
The topic also describes how to install the patch.

Note to be able to download 18-2 after you have installed the patch you must enter your plugout username and password in web interface (system mgt menu>setup>tab firmware interface

[leone101]

yes i already downloaded that file yesterday but it is not so clear how to transfer that file in fvdw share

[fvdw]

Just use windows file explorer and drag an drop the file in de fvdw folder
To epen fvdw folder in eindows file explorer type in the addres bar

Code: Select all

\\192.168.1.16\fvdw

Do not use internet explorer or browser

[leone101]

Yes i already did it but when i try to open link it says i don't have authorizations to enter in it. It also says "u cannot connect to the file share because it is not secure. This sharing requires the outdated SMB1 protocol which is insecure and could expose your system to attack. The system requires SMB2 or later.

I can't also install webetools (Fail: install command failed, -98) or mediaservers (instal command failed 17)because everytime i try it give me these errors message

[fvdw]

What operating system do you use? If it is windows 10 then you can enable smb1.
And..
Did you did this

Note to be able to download 18-2 after you have installed the patch you must enter your plugout username and password in web interface (system mgt menu>setup>tab firmware interface

You also need to do that to he able to download and install media servers etc..

But of course firstvyou need to install the patch as mentioned before